RK 150/20 Ton H Frame Press/Broach Press
With Powered Movable Workhead
in Ontario Canada

  • STANDARD FEATURES:
  • • Electric/Hydraulic operation provides smooth, consistent pressing action.
  • • Open sides to facilitate work on long pieces.
  • • Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
  • • Low speed pump - quiet, dependable operation.
  • • Self-locking table design eliminates lateral movement.
  • • Hydraulic power-lift for vertical displacement of table.
  • • Powered movable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever.
  • • Pressure regulator to limit the ram pressure.
  • • Cylinder activation is fingertip controlled, the more the hand lever is engaged the more the ram movement is accelerated.
  • • This allows the operator to control the proper speed for the task.
  • • High capacity 15 GAL. hydraulic oil reservoir.
  • • Low pressure hydraulic system maintains lower oil temperatures, resulting in higher effciency and safer operation.
  • • All hydraulic and mechanical parts are standard in the industry, and available throughout North America.
  • • Speed control limits the maximum speed of ram travel, allowing operator to select the proper speed for the task.

SPECIFICATIONS:
Rating
Motor
Electric Requirements
Cylinder Bore Press
Cylinder Bore Broach
Stroke Press
Stroke Broach
Ram Speed Press
Ram Speed Broach Press
Ram Speed Press "Return"
Ram Speed Broach Return
Reservoir
Dimensions
Weight
150 Tons
10 HP
3 Phase
11"
4"
16"
20"
6 IPM
22.5 IPM
24 IPM
159 IPM
15 Gallons
58" x 113" x 108"
7,400 Lbs

PRICE: $46,995.00

Back to RK