Uni Hydro 45 Ton
Hydraulic Ironworker
|
$6,695.00 *LEASE TO OWN" FOR $167.04/MTH |
 |
 |
 |
|
|
|
| PUNCH | |
| Maximum diameter x thickness | 1-1/8" dia. in 1/2" plate |
| Diameter x maximum thickness | 1-1/2" in 3/8"" |
|
|
|
| FLAT BAR SHEAR | |
| Maximum width | 3/8" x 14" |
| Maximum thickness | 1/2" x 10" |
| ANGLE SHEAR | |
| Slug type capacity @ 90° | 3" x 3" x 3/8" |
| Slug type capacity @ 45° | 2 x 2" x 5/16" |
| Bar shear capacity @ 45° | 3" x 3" x 3/8" |
| Sever type capacity @ 90° | 3" x 3" x 1/4" (Optional) |
| OPTIONS | |
| Tooling and accessories | -Starter punch & die set |
| -Coper notcher, Angle notcher | |
| -Sever shear housing | |
| -Pipe notcher | |
| -Bending brake | |
| -Sever rod shear blades | |
| -Rod shear | |
| -Channel shear blades | |
| -Back gauge | |
| -Gauging tables | |
| -Grease bank | |
| -Punch rack | |
| -Offset die stand | |
| GENERAL SPECS | |
| Rated capacity | 45 Tons |
| Throat Depth | 6" |
| Electric motor standard |
3 HP 208/240v, |
| Electric motor options | 3 HP 440/480v or 575v, 3 HP 1 Phase, 208/240v |
| Valve pressure | 1000 psi |
| Reservoir | 15 Quarts |
| Dimensions: Base | 34" x 28" |
| Height | 60" |
| Shipping weight | 1,240 pounds |