Edwards 75 Ton
Ironworker
|
$12,995.00 "LEASE TO OWN" FOR $314.47/MTH |
 |
 |
 |
|
|
|
| PUNCH | |
| Maximum Capacity | 1-1/16" dia. in 7/8" plate |
| Work Height | 41-1/2" |
|
|
|
| FLAT BAR SHEAR | |
| Maximum Width | 1/2" x 14" |
| Maximum Thickness | 3/4" x 10" |
| Maximum Round | 1" |
| Maximum Square | 1" |
| Work Height | 41-1/2" |
| ANGLE SHEAR | |
| Maximum Size | 5" x 5" x 3/8" |
| Work Height | 49" |
| RECTANGULAR NOTCHER | |
| Maximum Capacity | 2-1/2" x 5" x 1/2" |
| Work Height | 39-1/4" |
| OPTIONS | |
| Tooling and Accessories | -Oversized Punching Assembly |
| -Angle Notcher | |
| -Pipe Notcher | |
| -Bending Brake | |
| -Multi Shear | |
| -Rod Shear | |
| -241 Punch Assembly | |
| -Back Gauge | |
| -Gauging Tables | |
| -Pedestal Die Table | |
| -Magna Light | |
| -Urethane Stripper | |
| GENERAL SPECS | |
| Rated Capacity | 75 Tons |
| Throat Depth | 10" |
| Open Height | 8-3/4" |
| Shut Height | 6-7/8" |
| Stroke | 1-7/8" |
| Electric Motor Standard |
5 HP, 3
Phase, 208/240 v, 1765 rpm, 13 amp |
| Electric Motor Options | 5 HP, 3 Phase, 440/480 v or 575 v, 13 amp, 5 HP, 1 Phase, 208/240 v, 1725 rpm, 26 amp |
| Hydraulic Pump | 10-1/2 gpm - 2 stage |
| Valve Pressure | 2800 psi |
| Reservoir | 17 Gallons |
| Cylinder | 3-1/2" ram |
| Dimensions: Base | 38" x 44" |
| Height | 60" |
| Shipping weight | 3.300 pounds |