Edwards "Elite"
110 Ton
Ironworker
|
$20,395.00 "LEASE TO OWN" FOR $474.99/MTH |
 |
 |
 |
|
|
|
| PUNCH | |
| Maximum Capacity | 1-1/16" dia. in 1" plate |
| Work Height | 41" |
|
|
|
| FLAT BAR SHEAR | |
| Maximum Capacity | 1" x 12" |
| Maximum Width | 3/4" x 14" |
| Maximum Round | 1-1/4" |
| Maximum Square | 1-1/4" |
| Work Height | 41-1/2" |
| ANGLE SHEAR | |
| Maximum Size | 6" x 6" x 1/2" |
| Work Height | 50-7/8" |
| COPER NOTCHER | |
| Maximum Capacity | 2-1/2" x 5" x 1/2"" |
| Work Height | 37-1/2" |
| OPTIONS | |
| Tooling and Accessories | -Oversized Punching Assembly |
| -Angle Notcher | |
| -Pipe Notcher | |
| -Bending Brake | |
| -Multi Shear | |
| -241 Punch Assembly | |
| -Back Gauge | |
| -Gauging Tables | |
| -Pedestal Die Table | |
| -Magna Light | |
| -Urethane Stripper | |
| GENERAL SPECS | |
| Rated Capacity | 110 Tons |
| Throat Depth | 11-3/4" |
| Open Height | 8-5/8" |
| Shut Height | 6-13/16" |
| Stroke | 1-13/16" |
| Electric Motor Standard |
7.5 HP, 3
Phase, 208/240 v, 1765 rpm, 14 amp |
| Electric Motor Options | 10 HP, 3 Phase, 440/480 v or 575 v, 7 amp |
| Hydraulic Pump | 10-1/2 gpm 2 stage |
| Valve Pressure | 3000 psi |
| Reservoir | 17 Gallons |
| Cylinder | 3-1/2" ram |