CanSaw Header

Eagle Z402 Series
Tube/Pipe Profile Bender
ZM402 ZH402H
$10,295.00
"LEASE TO OWN"
FOR $249.13/MTH
ZH402
$11,395.00
"LEASE TO OWN"
FOR $275.76/MTH
Return Print
The “New” ZM402 & ZH402 are three roll, pyramid type Universal Roll Bending Machines with manually or hydraulically adjusted forming roll, dual driven lower rolls, and detached control stand with electronic LED readout to monitor the forming roll. Our units roll standard / special sections and tube / pipe in a variety of material types. These machines are 100% Eagle. Top of the line, superior in every aspect with solid steel main frame. We use no castings in our machines unlike many other “look alikes”. Our efficient pyramid design uses a wide lower inter-axis and extended forming roll vertical travel to maximize bending power. Higher weight, 100% more reliable frame,100% superior warranty than most “Look Alike” brands.
 
 
ZM402 Manual Adjustment of Top Roll, Powered Lower Rolls in Rotation for Positive Traction, LED Readout
 
 
ZH402 Hydraulic Adjustment of Top Roll, Powered Lower Rolls in Rotation for Positive Traction, LED Readout
 
 
CAPACITIES:  
Flats, (easy) 2-1/3” x 3/8” Ø 24”
Flats, (hard) 4” x 5/8” Ø 16”
Square bar 1-3/8” x 24”
Angle (leg out) 2” x 2" x 3/16” Ø 24”
Angle (leg in) 2” x 2" x 3/16” Ø 28”
Tee (leg out) 2-1/4” Ø 30”
Tee (leg in) 2-1/4” Ø 30”
Channel (leg out) 3" x Ø 24”
Channel (leg in) 3” x Ø 30”
Round bar 1-3/8” Ø 24”
Pipe (Sch 40) 1-1/2” Ø 24”
Round tube 2-1/2” x 1/16 x Ø 24”
Square tube 2” x 12ga x Ø 56”
Rectangle tube 2-1/4” x 1-1/4” x 11ga x Ø 40”
 
SPECIFICATIONS:  
Driven Rolls 2
Rolling Speed 15 FPM
Working plane Vertical/Horizontal
Repeat Control LED READOUT
Installed Power HP 2.25
Approx. Dimensions 40” X 29” X 50”
Approx. Shipping Weight 870 pounds