CanSaw Header

Eagle CP30 Series
Tube/Pipe Profile Bender

Print CP30
CP30V
Print Specs
Return

The CP30 is a 3 Roll Pyramid Style Universal Profile Roll Bending Machine with powered rotation for forward/reverse bending and 18 Piece Universal Tooling in 55 HRC hardened tool steel that will roll most standard profiles the day your machine arrives. Set-up for different profiles fast by simply sliding rollers onto the large 1.18” (30 mm) O.D. shafts and tighten the nut. Hardened Honed Shafts have Large Dual Tapered Roller Bearings. Lower shafts are motorized with knurled rollers for traction. The idle top shaft uses smooth surfaced rollers. The top roll position adjusts easily to set your bending radius. The Large High Brightness LED Digital Readout permits precision repeat positioning (except E).

CP30MS Short Base for Trailer, Truck or Bench Mounting, LED Readout, 1 Speed 220V 1 Phase

CP30E PR Linear Top Roll Positioning Scale, Foot Pedal Controls for Rotation, Tilting Head for Horizontal. & Vertical Operation, 1 Speed 220V 3 Phase.

CP30 PR 2V LED Readout, Foot Pedal Controls for Rotation, Tilting Head for Horizontal & Vertical Operation, 2V: 2 Speed 220V 3 Phase.

CAPACITIES:  
Flats, (easy) 3”x 5/8” Ø 16”
Flats, (hard) 2”x 3/8” Ø 16”
Square bar 1-1/8” x 24”
Angle (leg out) 1-1/2” x 3/16” Ø 16”
Angle (leg in) 1-1/2” x 3/16” Ø 22”
Tee (leg out) 2” Ø 16”
Tee (leg in) 2” Ø 20”
Channel (leg out) 2” Ø 12”
Channel (leg in) 2” Ø 16”
Round bar 1-1/4” Ø 24”
Pipe (Sch 40) 1-1/2” Ø 20”
Round tube 2-3/8” x 16ga. Ø 40”
Square tube 1-1/2” x 11ga Ø 40”
Rectangle tube 2” x 1” x 11ga Ø 48”

SPECIFICATIONS:  
Driven Rolls 2
Rolling Speed 10.5 FPM
Working plane Vertical/Horizontal
Repeat Control LED Readout
Installed Power HP 1.5
Approx. Dimensions 27” X 52” X 48”
Approx. Shipping Weight 550 pounds